Design for the Recycling of Pavements
Price: $ 87.00 (USD)
Add to Cart
You will receive 0.3 credit (CE) upon completion of this course.
Have a question about this course? .
Course Description
Overview
The use of recycled materials in pavement applications is on the rise. Factors contributing to the increased usage include the reduction of wear and tear on equipment required to haul new materials long distances; development and improvement of the technology and equipment used in the recycling process; and elimination of environmental impacts related to disposing of debris.
This course will provide information on preparing plans and specifications for recycling pavements and for ensuring the quality of recycled bituminous and Portland cement concrete.
The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of the course to obtain PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
Back to Top
The use of recycled materials in pavement applications is on the rise. Factors contributing to the increased usage include the reduction of wear and tear on equipment required to haul new materials long distances; development and improvement of the technology and equipment used in the recycling process; and elimination of environmental impacts related to disposing of debris.
This course will provide information on preparing plans and specifications for recycling pavements and for ensuring the quality of recycled bituminous and Portland cement concrete.
The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of the course to obtain PDH credits.
Specific Knowledge or Skill Attained
This course teaches the following specific knowledge and skills:
· Recycling Pavement Development
· Advantages and Disadvantages of Pavement Recycling
· Surface Recycling of Pavements
· Recycling Cold-Mix Asphalt Concrete
· Recycling Hot-Mix Concrete
· Recycling of Portland Cement Concrete
· Method of Repair for Bituminous Pavement Rehabilitation
· Method of Repair for PCC Pavement Rehabilitation
· Recycled Asphalt Concrete Design
State Board Acceptance
This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.
*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.
**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.
More Information
| Language | English |
| Course Length | 3.00 hours |
| Duration of Access | 365 Days |
| Continuing Education Credits | 0.3 |
| Instructor | Self Study |
| Vendor | PDH Engineer (Read more about PDH Engineer accreditation.) |
| Course Certification | Certificate of Completion |
Price: $ 87.00 (USD)
Add to Cart